Tratamento integrado para correção do sorriso gengival: relato de caso / Integrated treatment for correction of gingival smile: case report

O sorriso gengival possui inúmeras causas, podendo acontecer por motivos esqueléticos, musculares ou por alteração no desenvolvimento dos tecidos de suporte. No entanto, na atualidade, a estética vermelha e a branca têm se apresentado completamente passíveis de transformações e com uma gama de procedimentos cirúrgicos ou não cirúrgicos para sanar as queixas dos pacientes. O objetivo geral deste trabalho é mostrar o poder que a odontologia tem frente às questões estéticas, como, por exemplo, a vergonha de sorrir por não se sentir confortável com os dentes curtos e com uma grande faixa de gengiva sendo exposta. O método utilizado foi um relato de caso. Que descreve todos os passos clínicos do tratamento de um paciente de 40 anos, que estava insatisfeita com o seu sorriso por apresentar erupção passiva alterada juntamente com hiperatividade do lábio superior. O plano de tratamento escolhido foi de realizar a cirurgia de aumento de coroa clínica estético, seguido de clareamento dentário e posteriormente um reposicionamento labial, com ajuda da toxina botulínica. Finalizando, para ajudar na cicatrização, o uso de laserterapia. O resultado de todo o processo cirúrgico envolvido neste trabalho, é satisfação do paciente, materializando o sonho deste, devolvendo segurança e espontaneidade ao sorrir. Pôde-se observar que através da combinação de técnicas cirúrgicas periodontais para tratar o sorriso gengival, obtém-se êxito tanto no sentido científico quanto no biológico, alcançando um sorriso esteticamente mais atrativo(AU)

Gummy smile has numerous causes, which can occur for skeletal or muscular reasons or due to changes in the development of supporting tissues. However, nowadays, the red and white aesthetics have been completely capable of transformation and with a range of surgical or non-surgical procedures to resolve patients' complaints. The general objective of this work is to show the power that dentistry has in the face of aesthetic issues, such as, for example, the shame of smiling due to not feeling comfortable with short teeth and a large strip of gum being exposed. The method used was a case report. Which describes all the clinical steps of the treatment of a 40-year-old patient, who was dissatisfied with her smile due to an altered passive eruption together with hyperactivity of the upper lip. The chosen treatment plan was to perform aesthetic clinical crown augmentation surgery, followed by tooth whitening and later lip repositioning, with the help of botulinum toxin. Finally, to help with healing, the use of laser therapy. The result of the entire surgical process involved in this work is patient satisfaction, materializing the patient's dream, restoring security and spontaneity when smiling. It was observed that through the combination of periodontal surgical techniques to treat gummy smile, success is achieved both in the scientific and biological sense, achieving a more aesthetically attractive smile(AU)

Transferring emergence profile and position of interim restorative implant fixture. A novel digital technique.

The present technical article describes a protocol to digitally reproduce the emergence profile of an interim implant prosthesis (IP) and to transfer its macrogeometry into the definitive restoration. The purpose of this protocol was to minimize alterations in the gingival architecture developed during the interim restorative phase of a single implant that could potentially jeopardize its esthetic outcome. The process included obtaining an intraoral scan with the interim IP in situ, a duplicate of this intraoral scan that was used to capture the exact position of the implant, and an extraoral scan of the prosthesis. These data could then be imported into IOS software to create a model where the patients' soft tissue was incorporated with precision, allowing for the fabrication of a definitive crown with an optimal soft tissue adaptation. As there are few articles in the scientific literature that have reported a consistent method to replicate the emergence profile of an interim IP, the present technical article aims to highlight the potential of utilizing the emergence profile of an interim IP created by IOS software.

Immediate implant placement in a dialysis patient. A case report.

Implant-supported rehabilitation in high-risk patients poses significant challenges for the dental team. The presence of comorbidities and increased infection risk can, for example, lead to a higher risk of implant loss. For the therapy to be completed with as few complications as possible, special anamnesis, detailed diagnostics, and a risk analysis based on those findings are indispensable. The aim of all considerations is to keep the risk of infection for the patient with a disease history to a minimum and to strive for an appropriate functional and esthetic therapeutic success. Particularly in the esthetic zone, in addition to the general health risks of the surgical procedure, esthetic aspects are increasingly taken into account in planning. The present article describes the implant-prosthetic replacement of a single anterior tooth in a dialysis patient. Several aspects (regular dialysis, missing buccal lamella, high smile line, functional risk) increased the risk of complications in this case.

Advanced digital planning approach using a 3D-printed mock-up. A case report.

OBJECTIVE: A diagnostic mock-up is a key tool that allows a preview of the outcome of an esthetic restoration. With recent developments in CAD/CAM technology, it is important to understand the pros and cons of chairside digital dentistry and the restorative materials used. The aim of the present case report is to describe in detail the use of a 3D-printed mock-up fabricated from a polymer-based material for an esthetic treatment plan within a fully digital workflow. CASE REPORT: A 45-year-old female patient presented at the clinic concerned about her esthetic appearance and the color of her anterior incisors. After a conclusive diagnosis, a restoration was planned using ceramic veneers from maxillary premolar to premolar. For a preview visualization of the outcome, an intraoral scanner was used to obtain 3D images and to allow the design of a digital smile. The template STL file was exported to a 3D printer and a 0.6-mm mock-up in A3-shade 3D resin was produced after 25 min. The mock-up was tested through a try-in and approved by the patient. As a result, the printed mock-up was considered predictable and reliable for the final restoration. CONCLUSIONS: The ease, speed, and reduced costs derived from the digital workflow, in conjunction with the accuracy of the mock-up, made the procedure highly efficient and recommendable.

Fracture resistance and failure mode of three esthetic CAD-CAM post and core restorations.

BACKGROUND: The rising demand for improved aesthetics has driven the utilization of recently introduced aesthetic materials for creating custom post and core restorations. However, information regarding the fracture resistance of these materials remains unclear, which limits their practical use as custom post and core restorations in clinical applications. AIM OF THE STUDY: This study aimed to evaluate the fracture resistance of three non-metallic esthetic post and core restorations and their modes of failure. MATERIALS AND METHODS: Thirty-nine single-rooted human maxillary central incisors were endodontically treated. A standardized post space preparation of 9mm length was performed to all teeth to receive custom-made post and core restorations. The prepared teeth were randomly allocated to receive a post and core restoration made of one of the following materials (n=13): glass fiber-reinforced composite (FRC), polyetheretherketone (PEEK) and polymer-infiltrated ceramic-network (PICN). An intraoral scanner was used to scan all teeth including the post spaces. Computer-aided design and computer-aided manufacturing (CAD-CAM) was used to fabricate post and core restorations. Post and core restorations were cemented using self-adhesive resin cement. All specimens were subjected to fracture resistance testing using a universal testing machine. Failure mode analysis was assessed using a stereomicroscope and SEM. The data was statistically analyzed using One-Way ANOVA test followed by multiple pairwise comparisons using Bonferroni adjusted significance level. RESULTS: Custom PEEK post and core restorations displayed the least fracture load values at 286.16 ± 67.09 N. In contrast, FRC exhibited the highest average fracture load at 452.60 ± 105.90 N, closely followed by PICN at 426.76 ± 77.99 N. In terms of failure modes, 46.2% of specimens with PICN were deemed non-restorable, while for PEEK and FRC, these percentages were 58.8% and 61.5%, respectively. CONCLUSIONS: Within the limitation of this study, both FRC and PICN demonstrated good performance regarding fracture resistance, surpassing that of PEEK.

Oral health-related quality of life in implant-supported rehabilitations: a prospective single-center observational cohort study.

BACKGROUND: Oral Health-Related Quality of Life (OHRQoL) is a comprehensive concept covering daily comfort, self-esteem, and satisfaction with oral health, including functional, psychological, and social aspects, as well as pain experiences. Despite abundant research on OHRQoL related to oral diseases and hygiene, there is limited data on how patients perceive changes after implant-prosthetic rehabilitation. This study aimed to evaluate OHRQoL and aesthetic perception using OHIP-14 and VAS scales respectively, before (baseline-TB), during (provisional prostheses-TP), and after (definitive prostheses-TD) implant-prosthetic rehabilitation. It also explored the impact of biological sex, substitution numbers, and aesthetic interventions on OHRQoL and VAS scores, along with changes in OHIP-14 domains. METHODS: A longitudinal prospective single-center observational cohort study was conducted with patients requiring implant-prosthetic rehabilitation. Quality of life relating to dental implants was assessed through the Italian version of Oral Health Impact Profile-14 (IOHIP-14), which has a summary score from 14 to 70. Patients' perceived aesthetic was analyzed through a VAS scale from 0 to 100. Generalized Linear Mixed Effect Models, Linear Mixed Effect Models, and Friedman test analyzed patient responses. RESULTS: 99 patients (35 males, 64 females) aged 61-74, receiving various prosthetic interventions, were enrolled. Both provisional and definitive prosthetic interventions significantly decreased the odds of a worse quality of life compared to baseline, with odds ratios of 0.04 and 0.01 respectively. VAS scores increased significantly after both interventions, with estimated increases of 30.44 and 51.97 points respectively. Patient-level variability was notable, with an Intraclass Correlation Coefficient (ICC) of 0.43. While biological sex, substitution numbers, and aesthetic interventions didn't significantly affect VAS scores, OHRQoL domains showed significant changes post-intervention. CONCLUSIONS: These findings support the effectiveness of implant-prosthetic interventions in improving the quality of life and perceived aesthetics of patients undergoing oral rehabilitation. They have important implications for clinical practice, highlighting the importance of individualized treatment approaches to optimize patient outcomes and satisfaction in oral health care.

Immediate Loading Using the Digitalized Customized Restoration of Single-tooth Implants Placed in Fresh Extraction Sockets in the Aesthetic Anterior Maxilla: A 10-Year Prospective Study of Marginal Bone Level.

AIM: The objective of this study was to assess marginal bone level around single implants inserted in fresh extraction sockets in the anterior maxillary region and instantly restored with computer-aided design/computer-aided manufacturing customized temporary crowns cemented on the final abutment. MATERIALS AND METHODS: A total of 20 patients (15 females and 5 males, with a mean age of 30 years), where 20 were placed in fresh extraction sockets. After raising a full-thickness flap, atraumatic extraction was performed the implant site was prepared and fixtures were stabilized on the palatal bone wall. The implant location was immediately transmitted to the prepared master model using the pick-up impression coping seated in the surgical guide template. Prefabricated abutments were used as the final abutment on the master model, scanned and the crown was planned using computer-aided manufacturing customized software. Later on 8th weeks, abutments were torqued as per the manufacturer's recommendation, and the final crowns were cemented. Using personalized intraoral radiographs marginal bone level was evaluated mesially and distally to the implant shoulder as a reference at implant placement, 8 weeks, 1, 3, 5, and 10 years after loading. RESULTS: Wholly implants were osteo-integrated positively after 10 years of practical loading, but only 18 were available for clinical and radiological follow-up, and 2 patients with two implants were excluded from the study due to relocation abroad without any implant failure. The average marginal bone loss (MBL) in the current report was 0.16 ± 0.167 mm at crown cementation, 0.275 ± 0.171 mm after 1 year, 0.265 ± 0.171 mm after 3 years, 0.213 ± 0.185 mm after 5 years, and 0.217 ± 0.194 mm at 10 years. CONCLUSION: The strategy of inserting and not removing the final abutment at the time of implant placement facilitates the establishment of adequate attachment of both soft and hard tissues to the abutment surface, ensuring uninterrupted organization of tissue architecture and offers advantages in helping maintain soft tissue maturation and preventing marginal bone level. CLINICAL SIGNIFICANCE: Immediately loaded implants in freshly extracted sockets lead to a significant reduction in marginal ridge resorption. The use of a temporary crown on a prefabricated abutment, exclusive of successive abutment manipulation, proved effective in preserving the primarily founding blood clot and served as a prototype for shaping the soft tissue around the previously wounded gum. How to cite this article: Berberi A, El Zoghbi A, Aad G, et al. Immediate Loading Using the Digitalized Customized Restoration of Single-tooth Implants Placed in Fresh Extraction Sockets in the Aesthetic Anterior Maxilla: A 10-Year Prospective Study of Marginal Bone Level. J Contemp Dent Pract 2024;25(3):213-220.

Aesthetic perception of patient in developmental age in interceptive orthodontic treatment.

AIM: Patients at development age show considerable attention to the shape of the face from both an aesthetic and relational point of view, to arouse interest from researchers. There are few studies related to profile analysis in patients of developmental age. Therefore, the objective of the present study was to analyse the importance of the aesthetic perception of the patient in development age in relation to the profile, before and after interceptive orthodontic treatment. MATERIALS: A sample of 25 patients who came to our observation for dentoskeletal malocclusions was considered. A questionnaire was proposed to each patient, before and after the interceptive orthodontic treatment (T0 and T1), to evaluate the aesthetic perception before and after the orthodontic treatment and its psychosocial impact. Profile analysis was performed using photographic documentation (at T0 and T1). The variables considered were the Ricketts line, the facial convexity angle, the nasolabial angle, and the labiomental angle. CONCLUSION: Interceptive orthodontic treatment has proven to be of valid clinical and psychological help. This result is confirmed by the complete aesthetic satisfaction of the patient in the frontal and latero-lateral planes.

Bleaching efficacy of in-office dental bleaching with different application protocols: a single-blind randomized controlled trial.

OBJECTIVE: This randomized controlled trial aimed to evaluate the equivalence in the color change, adverse effects, self-perception (AS) and the impact on oral condition (IO) of participants submitted to different application protocols of in-office dental bleaching. MATERIALS AND METHODS: 165 participants were bleached with a 35% hydrogen peroxide gel (Total Blanc Office One-Step, DFL), according to the following protocols: (1) 2 applications of 20-min each (2 × 20 min); (2) 1 × 40-min and; (3) 1 × 30-min. The color change was evaluated with the Vita Easyshade spectrophotometer, Vita Classical and Vita Bleachedguide scales. The intensity and risk of tooth sensitivity (TS) and gingival irritation (GI) were recorded using a 0-10 visual analogue scale (VAS). AS and IO was assessed before and after the bleaching procedure using the Orofacial Aesthetic Scale and Oral Health Impact Profile-14, respectively. RESULTS: Equivalent color change were observed (p < 0.001), with no significant difference between groups. The group 2 × 20 min presented the highest risk of TS (76%, 95% CI 63 to 85), compared to the 1 × 30 min (p < 0.04). The intensity of TS and GI and the risk of GI was similar between groups (p > 0.31). Irrespectively of the group (p = 0.32), significant improvements were observed for all items of AS and IO after bleaching (p < 0.02). CONCLUSIONS: The 1 × 30 min protocol produced equivalent color change to the other bleaching protocols with reduced risk of TS and shorter application time. CLINICAL RELEVANCE: A more simplified application regimen of a single application of 30 min yields effective bleaching and patient satisfaction while minimizing undesirable side effects and improving patient satisfaction.

[Total rehabilitation in case of amelogenesis imperfecta].

The aim of the treatment of this case was to restore the form, function and aesthetics of all teeth in a patient with amelogenesis imperfecta within the age limit of the disability insurance (IV). Single-tooth zirconia crowns were selected as the treatment of choice and cemented with a conventional glass ionomer cement. For the maintenance of the oral rehabilitation and the protection of the reconstructions a michigan splint was produced and instructed to be carried over night.

Determining the widths of the maxillary anterior teeth for esthetics: comparison of the Mondelli and Albers formulas, esthetic proportion, and golden ratio.

The purpose of this study was to compare various formulas for idealized proportions of the maxillary incisors to the actual dimensions of natural teeth. The Mondelli formula 1 (MF1), Mondelli formula 2 (MF2), Albers formula (AF), esthetic proportion (EP) for width and height of anterior teeth, and golden ratio (GR) were calculated for a total of 50 dental students (30 women and 20 men) who participated in the study. The following measurements were obtained directly in the participant's mouth with a digital caliper: the mesiodistal and incisogingival dimensions of the maxillary central incisors, lateral incisors, and canines; the intercanine distance; and the smile width. The participants were photographed, and the smile width was also measured on the photographs. The MF1 and MF2 were each calculated twice, using both direct measurements and photographic measurements. The projected central incisor widths calculated using the MF1, MF2, and AF were compared among themselves and against the actual measurements using analysis of variance and Fisher test for multiple comparisons (α = 0.05). The EP and GR were analyzed using descriptive statistics. There was a statistically significant difference between all of the widths projected by the formulas and the actual widths of the central incisors (P < 0.05). Whether calculated from a direct or a photographic measurement, the incisor widths projected by the MF1 and MF2 were statistically similar to each other (P > 0.05). The EP values were similar to those reported in the literature. Only 2% of the participants had an incisor width ratio (central incisor/lateral incisor) that matched the GR of 1.618, while 86% fell within the range of 1.2 to 1.4. Overall, the proportions calculated with the MF1, MF2, AF, EP, and GR did not exactly match the actual dimensions of natural teeth. The formulas and the proportions available in the literature can assist in esthetic planning, but the individual characteristics of each patient and expertise of the dentist should guide treatment for each case.

Automotive Technology Revolutionized Restorative Dentistry Discovery of Alpha-diketone/Amine Catalyst: Part II -Reflections on Photopolymerization from Conception to Development of Composite Resin and Activator Light.

A full account of the preceded early research tribulation that led to the development of the first visible light activated composite resin and the first visible light activator source is documented. The events took place over four years since early 1974 when a raw industrial composite resin that was radiolucent, stiff paste, universal optically opaque white color, polymerized by exposure to a prototype visible light for 120 seconds was given to developed. Four years later, the developed restorative composite resin ended up as a radiopaque, optically translucent, universal color with an additional three shades that possessed the biologic, esthetic, mechanical and physical characteristics with proven efficacy be used for esthetic zone. This conservative account of early development of a technology that must count as one of a small number of inventions during the seventies, over the years has revolutionized restorative dental practice. We were privileged and very lucky to be associated with developmental stages, stumbling blocks, and final success of the first LC Composite resin that ignited the thought process worldwide and laid the foundation for modern esthetic restoratives practiced today.

Assessment of reproducibility and influence of different dental specialties on functional implant prosthodontic score: A prospective clinical study analyzing single-unit implant crowns.

AIM: Implant therapy in partially edentulous patients has become the most adapted and predictable treatment modality. The success rate of implants has been measured in terms of esthetic, biological, and technical factors such as radiographic bone loss, prosthetic complications, and stability. Despite the existence of several indices for the esthetic assessment of implant crowns, a need for functional evaluation of the implant crown with an objective and reproducible score has arisen. The study aims to validate the reproducibility of the functional implant prosthodontic score (FIPS) and the influence exerted by different dental specialties while evaluating posterior single-unit implant crowns. STUDY SETTING AND DESIGN: This was a prospective clinical study. MATERIALS AND METHODS: Fifteen patients with cement-retained single-implant crowns in the posterior region of the jaws were included. Eight examiners, two prosthodontists, two periodontists, two oral surgeons, and two orthodontists evaluated 15 photographs of single-unit implant crowns during the 1-year follow-up examination. The examiners assessed the photographs for FIPS, which includes five parameters for objectively evaluating the single-unit implant crowns. Assessments were performed twice at a gap of 4 weeks. STATISTICAL ANALYSIS USED: Pearson's correlation with a 95% confidence interval was calculated for the intra-examiner and the Kruskal-Wallis test for inter-examiner reproducibility. RESULTS: The mean total FIPS scores for all included examiners were 7.133 for time T1 and 7.074 for time T2, showing a strong Pearson correlation coefficient for intra-examiner reproducibility. No significant difference was analyzed among different specialties with statistically significant values of the Kruskal-Wallis test. CONCLUSION: Intra- and inter-examiner analysis showed very consistent results during the reproducibility assessment of FIPS. The results validated the use of FIPS as a long-term predictive functional evaluation tool for the single-implant crowns in posterior sites irrespective of the effect of different dental specialties. It could be used for risk estimation and prognosis for long-term survival and performance of implant crowns.

Clinical application principles and new developments of zirconia crown.

Zirconia crown has been widely used in the field of prosthodontics. Traditional zirconia exhibits excellent mechanical properties but lacks translucency. The introduction of transparent zirconia significantly enhances its aesthetic performance. In clinical applications, factors affecting the aesthetic results of full zirconia crown should be comprehensively considered, and the most suitable restoration should be chosen. Additionally, clinicians need to design appropriate tooth preparation dimensions and methods based on an individual patient's actual situation. During the clinical bonding process of zirconia, proper surface treatment of the tooth and restoration is essential. The selection of suitable adhesives is crucial for achieving optimal bonding strength and aesthetics.

Classified diagnosis and treatment scheme of oral cosmetic restoration based on aesthetic analysis (part â ¡): Chinese aesthetic connotation and analysis scheme.

At present, the commonly used clinical protocols of oral cosmetic restoration are mostly based on the oral aesthetic indexes proposed by Western developed countries (referred to as Western aesthetics), which are different from the oral aesthetic indexes unique to Chinese people (referred to as Chinese aesthetics). In the design of restoration schemes and the evaluation of restoration effects, these differences have a large or small effect on the doctor-patient-technology triad. Improper handling could directly weaken the cooperation efficiency of the three parties, reduce patient satisfaction, and even lead to medical disputes in serious cases. From doing a good job of oral cosmetic restoration in China, the connotative characteristics of Chinese oral aesthetics are introduced in this paper, and the value of oral aesthetic analysis in diagnosis and treatment is discussed. The process and method of aesthetic analysis and assessment through the modified Chinese psychosocial impact of dental aesthetics questionnaire and the evaluation ruler of the expected value of oral cosmetic restoration are further introduced in detail.